SK Weldedmesh manufactures 868 twin wire mesh fencing (double wire fence) for industrial plants, highways and road medians, logistics parks, schools, sports grounds, construction sites and housing projects across India. An 8 mm horizontal wire is welded on each side of every 6 mm vertical wire, giving a flat, rigid panel that does not bend or warp and needs no V-folds for stiffness.
| Mesh aperture | 65 × 200 mm (50 × 200 mm on request) |
|---|---|
| Wire diameter | 8 mm twin horizontal wires, 6 mm vertical wire (868); 6/5/6 (656) on request |
| Panel width | 2015 mm (2500 mm on request) |
| Panel height | 1200 mm and 1886 mm standard; 1500, 2015 and 2400 mm on request |
| Posts | 60 × 60 × 1.5 mm square posts with cap; 4 × M10 × 120 anti-tamper clamps per post; 130 × 130 × 8 mm base plate or concrete-embedded |
| Coating | Pre-galvanised wire, then polyester powder coated (PPC) or thermoplastic coated (TPC) to minimum 80 microns as per IS 13871 |
| Standards | EN 10223-7, BS 1722-14 |
| Colour | RAL 6005 green, RAL 9005 black, RAL 7016 grey, or any RAL shade |
Send your BOQ or tender specification and we will quote line by line, including posts, gates, foundations and installation drawings.
The twin horizontal wires make the panel very stiff, so it installs flat without V-bends and suits long straight runs and ball-stop fencing.
8 mm wires and anti-tamper clamps resist bending, cutting and crowd pressure better than single-wire panels.
Flat panels with no folds, ideal for corporate campuses and public buildings.
Galvanised plus powder coated panels last 15 years or more outdoors with no maintenance.
Concertina coil, barbed wire or anti-climb spikes where higher security is needed.
Panels, posts, clamps, security bolts and gates supplied together.
The wire sizes in order: 8 mm horizontal, 6 mm vertical, 8 mm horizontal. The two 8 mm wires are welded either side of the vertical wire, which is why it is called twin wire or double wire fencing. The lighter version is 656 (6 mm, 5 mm, 6 mm).
3D panel fencing (single 4 to 5 mm wire with V-folds) is lighter and cheaper and suits most boundaries. 868 twin wire is chosen where rigidity, impact resistance or a flat look matters, or where the tender specifies double-wire fencing. For anti-climb and anti-cut security, use 358 mesh.
Standard sizes in green or black ship within 2 to 3 weeks from order confirmation; project quantities are scheduled against the site programme.
Yes. Mill test certificates for the wire, galvanising and coating-thickness reports from our in-house lab, and third-party test reports from NABL-accredited laboratories on request.
Yes. Send the BOQ or specification and we will quote line by line, including posts, gates, foundations and installation drawings.
Yes. We supply 868 and 656 panels to Europe, the Middle East and Africa in container loads, with EN 10223-7 documentation.
It is pleasure working with well informed team of S.K.Weldedmesh Pvt. Ltd.,their expertise has brought results to our projects. They understand the customer’s requirements and priorities. A quality product is always appreciated in our field of work.
For years now we have trusted SK Welded products for a range of construction projects I have worked on. A good Mesh Manufacturing company in West Bengal that doesn’t just talk about quality but actually delivers it. Plus, their pricing is equally appropriate, which makes working with them an obvious and preferred choice.