SK Weldedmesh supplies perimeter fencing for solar parks, substations and wind farms across India: 3D welded mesh panels for long, economical boundaries, 868 twin wire where a heavier flat panel is specified, and 358 anti-climb mesh for inverter stations, control rooms and theft-prone sections. Powder coated mesh has no scrap value, so it stays on the fence in remote locations where chain link and barbed wire disappear.
| Park boundary (long runs) | 3D welded mesh panel, 2.0 to 2.4 m, 4 or 5 mm wire, 2500 mm panels |
|---|---|
| Inverter / transformer yards and control rooms | 358 anti-climb mesh 2.4 m with concertina topping |
| Substations and switchyards | 868 twin wire or 358 mesh, 2.4 m, with gates |
| Cattle and wildlife control | 3D panel 1.8 to 2.0 m with buried mesh skirt where required |
| Posts | 60 × 60 mm RHS at 2.5 m centres, concrete foundations or base plates |
| Coating | Galvanised + polyester powder coat, minimum 80 microns, IS 13871; RAL 6005 green or RAL 7016 grey |
| Standards | EN 10223-7, BS 1722-14; mesh to IS 4948 |
Send the plot drawing or boundary length and we will quote panels, posts, gates and foundations per running metre.
No resale value for powder coated mesh; chain link and barbed wire are stripped from remote sites.
Light 4 mm panels with V-folds give a rigid fence at the lowest cost for long boundaries.
Security staff and cameras see across the park; vegetation does not hide intruders.
Buried skirt and tight bottom rail stop animals; no barbs to injure them.
Anti-tamper clamps and bolts on every post.
Panels step across undulating land without gaps.
Most developers specify 2.0 to 2.4 m 3D welded mesh panels for the boundary and 2.4 m anti-climb mesh around inverter and control-room yards. We make to the height in your specification.
In remote sites chain link and barbed wire are cut and sold as scrap. Powder coated welded mesh has no scrap value and cannot be rolled up, so it stays in place; it also looks better for lender and ESG audits.
Yes. Mill test certificates for the wire, galvanising and coating-thickness reports from our in-house lab, third-party NABL test reports on request, and a line-by-line compliance statement against the tender specification.
Standard panels ship within 2 to 3 weeks of order confirmation; project quantities are scheduled against your site programme and delivered in phases from our Kolkata plant.
We manufacture and supply across India with installation drawings and a bill of materials. Installation is available through our approved partners, or your contractor installs with our drawings and site support.
It is pleasure working with well informed team of S.K.Weldedmesh Pvt. Ltd.,their expertise has brought results to our projects. They understand the customer’s requirements and priorities. A quality product is always appreciated in our field of work.
For years now we have trusted SK Welded products for a range of construction projects I have worked on. A good Mesh Manufacturing company in West Bengal that doesn’t just talk about quality but actually delivers it. Plus, their pricing is equally appropriate, which makes working with them an obvious and preferred choice.