SK Weldedmesh supplies welded mesh boundary fencing for Indian Railways, metro depots and station areas: 358 anti-climb mesh where trespass and cattle intrusion must be stopped on high-speed and electrified sections, 3D welded mesh panels for long depot and land-demarcation runs, and 868 twin wire where a flat, heavier panel is specified. All panels are galvanised and powder coated to IS 13871 and supplied as complete kits with posts, clamps and gates.
| Track-side on electrified / high-speed sections | 358 anti-climb mesh, 2.4 to 3.0 m, with Y-arm concertina topping |
|---|---|
| Station boundary and platform ends | 358 mesh or 868 twin wire, 1.8 to 2.4 m |
| Depot, yard and workshop perimeter | 3D welded mesh panel, 2.0 to 2.4 m, 4 or 5 mm wire |
| Land demarcation and encroachment control | 3D welded mesh panel 1.8 m, or chain link to IS 2721 where specified |
| Cattle and trespass control in rural sections | 3D panel 1.8 m with anti-burrow bottom rail or buried mesh |
| Coating | Galvanised + polyester powder coat, minimum 80 microns, IS 13871 |
| Standards | EN 10223-7, BS 1722-14; mesh to IS 4948; coating IS 13871 |
Send the tender clause and we will quote against it line by line, including posts, foundations, gates and installation drawings.
Small apertures give no foothold, so people and cattle cannot cross the track corridor.
Powder coated mesh is not stolen the way chain link and barbed wire are, so the fence stays complete.
Drivers, patrol staff and CCTV see through the fence; nothing hides behind it.
Anti-tamper clamps and bolts cannot be undone from outside without special tools.
Panels step with the terrain on embankments and cuttings without gaps.
Modular 2.5 m panels on bolted posts go up quickly between traffic blocks.
Tender clauses vary by zone. Track-side and station boundaries commonly call for anti-climb welded mesh (358 type) or 3D welded mesh panels, galvanised and powder coated, on steel posts in concrete. We quote exactly to the clause supplied.
Panels are modular and posts are bolted or set in pre-cast foundations, so work is done in short traffic blocks. We supply installation drawings and sequence with the site engineer.
Yes. Mill test certificates for the wire, galvanising and coating-thickness reports from our in-house lab, third-party NABL test reports on request, and a line-by-line compliance statement against the tender specification.
Standard panels ship within 2 to 3 weeks of order confirmation; project quantities are scheduled against your site programme and delivered in phases from our Kolkata plant.
We manufacture and supply across India with installation drawings and a bill of materials. Installation is available through our approved partners, or your contractor installs with our drawings and site support.
It is pleasure working with well informed team of S.K.Weldedmesh Pvt. Ltd.,their expertise has brought results to our projects. They understand the customer’s requirements and priorities. A quality product is always appreciated in our field of work.
For years now we have trusted SK Welded products for a range of construction projects I have worked on. A good Mesh Manufacturing company in West Bengal that doesn’t just talk about quality but actually delivers it. Plus, their pricing is equally appropriate, which makes working with them an obvious and preferred choice.